درایور استپر موتور ۴ آمپر TB6600

درایور استپر موتور ۴ آمپر TB6600


۶۲۰,۰۰۰ تومان

2 عدد در انبار

آخرین بروزرسانی : 3 اردیبهشت, 1402

بررسی اجمالی محصول

درایور استپر موتور 4 آمپر TB6600

نقد و بررسی : درایور استپر موتور ۴ آمپر TB6600

درایور استپر موتور ۴ آمپر TB6600

چها سیم برای ورودی

چهار سیم خروجی برای اتصال به استپ موتور

دو پایه برای ولتاژ درایور

۲ پایه برای فعالسازی استپ موتور

توضیحات تکمیلی

This driver is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments.

Applicable stepper motor:
۴۲,۵۷,۸۶type 2-phase ۴-phase (۴-wire line 6 line 8)

۱, ۹V-42V DC power supply;
۲, H – bridge bipolar constant – current driving;
۳, the maximum 4.0A eight selectable output current;
۴, maximum 32 segment six Subdivision optional;
۵, the input signal high-speed optical isolation;
۶, the standard total positive single pulse interface;
۷, offline maintenance function;
۸, semi-enclosed chassis can be adapted to more stringent environment;
۹, to provide energy-saving semi-automatic current lock function;
۱۰, built-in temperature protection and overcurrent protection.

درایور استپر موتور 4 آمپر TB6600Description of terminal definitions

Signal input
⑴ the CP + : positive pulse signal input terminal.
⑵ CP- : pulse signal input negative terminal.
⑶ the DIR + : the motor is, reverse control of the positive terminal.
⑷ the DIR – : the motor is, reverse control negative terminal.
⑸ EN + : motor off control of the positive terminal.
⑹ EN- : motor off control of the negative terminal.
Motor winding connection:
⑴ A + : Connect the motor windings A + phase.
⑵ A- : Connect the motor windings A- phase.
⑶ B + : Connect the motor winding B + phase.
⑷ B- : Connect the motor winding B- phase.

Operating voltage connection:

⑴ the VCC : Positive DC power supply (Note: 10V  < the VCC  < 4 2V ).
⑵ the GND : DC power supply negative.
Signal input optocoupler isolation connection
There are two input signal interface connection: the user may need to use common anode or common cathode connection.

۱ , common anode connection: respectively, the CP + , the DIR + , EN + is connected to the power supply control system, if the power supply is + 5V  can be connected directly, if the power supply is greater than + 5V , shall be an additional external current limiting resistor R & lt , guaranteed to drive internal optical coupling provides 8-15mA  drive current. Pulse input signal CP- access; In this case, the DIR – , EN- in low effective .

۲ , common cathode connection: respectively CP- , the DIR – , EN- connected to the control system ground terminal ( SGND , isolated from power ground); + 5V  pulse input signal by CP + added; In this case, the DIR + , EN + in high effective . Limiting resistor R  is connected in the same values and common anode connection. درایور استپر موتور ۴ آمپر TB6600

NOTE: 

EN end do not take, EN valid when the rotor is in a free state (offline), then the motor shaft can be rotated manually, do for your adjustment. After manual adjustment is completed, then EN is set to an invalid state to continue the automatic control.

درایور استپر موتور ۴ آمپر TB6600

Segment settings:
 Micro stp  Pulse / rev  S1  S2  S3
NC NC  ON ON  ON
 ۱ ۲۰۰  ON ON  OFF
 ۲ / A ۴۰۰  ON OFF ON
 ۲ / B  ۴۰۰ OFF  ON  ON
 ۴  ۸۰۰  ON OFF OFF
 ۸ ۱۶۰۰  OFF  ON  OFF
 ۱۶ ۳۲۰۰  OFF  OFF  ON
 ۳۲ ۶۴۰۰  OFF  OFF  OFF

Current setting:

Current (A)   PK Current S4  S5  S6 
۰.۵  ۰.۷  ON   ON  ON
۱.۰  ۱.۲  ON  OFF  ON 
۱.۵  ۱.۷  ON   ON  OFF
۲.۰  ۲.۲  ON OFF  OFF 
۲.۵ ۲.۷  OFF  ON  ON 
۲.۸  ۲.۹  OFF   OFF ON 
۳.۰  ۳.۲  OFF  ON  OFF
۳.۵  ۴.۰ OFF   OFF OFF

سی ان سی رومیزی

نقد وبررسی

نقد بررسی یافت نشد...

اولین نفر باشید که نقد و بررسی ارسال میکنید... “درایور استپر موتور ۴ آمپر TB6600”

این سایت از اکیسمت برای کاهش هرزنامه استفاده می کند. بیاموزید که چگونه اطلاعات دیدگاه های شما پردازش می‌شوند.

enemad-logo